Backflow Testing & Prevention Service Near Beltsville, MD

Frequent water leaks in your Beltsville home indicate some kind of failure or malfunction with your backflow prevention device, which needs to be addressed and repaired as soon as possible. Your backflow prevention device will wear out over time, and any rubber parts may crack or shift, leading to water leaks. If you do not have Sila repair your backflow prevention device, you could be facing long-term plumbing damage.

Sudden decreases in your Beltsville home’s water pressure indicate that the vacuum a backflow prevention system relies on is not working properly. This could be caused by a buildup of air pressure in your plumbing system, which means that your water pipes are at a higher risk of bursting. These changes in water pressure could also be due to defects in the opening points of the backflow preventer valves, or even because a backflow preventer is clogged with debris or otherwise damaged by debris that tried to pass through. In any case, your backflow preventer is not working correctly, and your water may be contaminated.

When a backflow prevention system breaks down or wears out, it will inevitably lead to your home’s clean water supply becoming contaminated. This can result in dirty water coming out of your Beltsville home’s fixtures. If you notice water with a pink, yellow, or brown tint coming out of your taps, or water with rust particles or sediment, you need to contact Sila immediately for emergency plumbing services. Do not drink any cloudy or discolored water, and always have a Sila expert inspect your water supply if you suspect it has become contaminated.

Slow drains due to minor clogs aren’t an emergency, but when you notice multiple slow drains around your Beltsville home, it could indicate that backflow has entered your clean water supply. This means that your backup prevention device may be suffering from a clog or other buildup, or that it needs to be replaced. Since you may already have backflow in your water supply, you’ll need to contact a plumbing professional, like the team at Sila, to perform emergency backflow services.

If your drinking water starts to develop a bad taste, it can indicate that your water has become contaminated. When a backflow prevention device stops working properly, it allows for contaminated water to enter your Beltsville home’s water supply, which can cause severe illness if consumed. Contact the Sila professionals immediately for emergency plumbing services, and do not drink the contaminated water from your fixtures.

Your Beltsville home’s water should never have a noticeable odor to it, so if your water ever starts to smell bad, it’s a strong indicator that contaminated wastewater has entered your clean water supply. A rotten egg smell in particular indicates that your water has a high sulfur content, which can cause severe illness if consumed. In this case, your backflow prevention device has most likely broken down, and you’ll need to call the experts at Sila to either repair or replace the faulty device.